Audio/ Visual Appliances
Fire Alarm Panels
Fire Safety Products
Flame & Gas Detection
Smoke & CO Alarms
Smoke & Fire Alarm Devices
Stoppers, Covers & Guards
The SFP-5UDC is a five-zone FACP (Fire Alarm Control Panel) and the SFP-10UDC is a ten-zone FACP. These control panels provide reliable fire signalling protection for small to medium-sized commercial, industrial, and institutional buildings. Both panels include built-in communicators for Central Station Service and remote upload/download.
Each of these FACPs is compatible with System Sensor’s microprocessor-based i3 series detectors. These conventional smoke detectors can transmit a maintenance trouble signal to the FACP indicating the need for cleaning and a supervisory “freeze” signal when the ambient temperature falls below the detector rating. Additionally, both the SFP-5UDC and SFP-10UDC are compatible with conventional input devices such as two- and four-wire smoke detectors, pull stations, water-flow devices, tamper switches, and other normally-open contact devices. Refer to the Notifier Device Compatibility Document for a complete listing of compatible devices.
Outputs include four NACs (Notification Appliance Circuits), three programmable Form-C relays (factory programmed for Alarm, Trouble, and Supervisory) and 24 VDC special application resettable and non-resettable power outputs. The FACPs supervise all wiring, AC voltage, battery level and telephone line integrity.
Activation of a compatible smoke detector or any normally open fire alarm initiating device will activate audible and visual signalling devices, illuminate an indicating LED, sound the piezo sounder at the FACP, activate the communicator and FACP alarm relay, and operate an optional module used to notify a remote station or initiate an auxiliary control function.